yes, but you need other supporting mods and k-pro. But if you took a completely stock a3, no bolt-ons and dynoed it. It would probably put down 40-45hp less. That's a HUGE difference.
Hi
I want to know how fast is a k20a3 vtec killer setup? is the diference to a stock k20a3 big?
yes, but you need other supporting mods and k-pro. But if you took a completely stock a3, no bolt-ons and dynoed it. It would probably put down 40-45hp less. That's a HUGE difference.
i'd start with a new motor. no sarcasm. the time and effort into doing this on the stock a3 isn't worth it. start with a better platform. plus you'll get actual vtec not the ecovtec we have..
Just a little reference...http://www.k20a.org/forum/showthread.php?t=66643
you do know a completely stock k20a2 is 166whp ? with vtec killer people been making 199whp. so its faster than stock k20a2
im noob, wth is vtec killer :(
i have a damaged k20z4 head and a k20a2 block with crank and k20a pistons and rods.I want to put the z4 cams ,valve springs and the rocker in the A3 Head and put in on the k20a2 block.i hope this setup make a many hp
@ justbobo vtec killer is vtec running all the time
If someone would develop one with half way decent low and mid range I would consider it. Haven't seen it yet.
for More Info! This seems interesting!
even without doing vtec killer setup with stage 2 or stage 3 cams, supporting mods, i/h/e 70mm tb rbc manifold and kpro u can make 190+ to the wheels
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks