Originally Posted by
jeremy
Tread was super helpful, just put in my white LEDs for the floor. My floor lights come on exactly when the center dome light comes on. you unlock the car they are on and don't fade until you lock the car or start the engine. and when you flip the center switch to the ON position they come on. i went through the dome light down the drivers pillar to the center console. in the dome light, i hooked the negative wire to the incoming center light prong. and hooked the positive wire to the incoming side-tap bulb prong. this puts it in parallel rather than series. it can get confusing because you can have your wires in the right spot but just have your neg. and positive switched, because LEDs are a basic diode and only work one direction. but anyways this thread helped me out a lot, thanks guys!
ohh and because its in the same circuit as the original dome light the standard fuse for that should suffice, no need of and extra fuse... so far, will let know if it draws too much. thanks
Bookmarks