Good find i been trying to get info about this brand !!!
Here's the turbo kit we've been talkin' about. I'll try to keep the first post updated with all the info so its easy to access.
http://www.emotorusa.com/index.asp
EM-USA = E-Motor USA of Indianapolis.
beats the hell out of this page:
http://www.emusaautomotive.com/
you can buy everything they make from http://www.speedyracer.com
Just thought I'd share.
EP3 Turbo Kit Installation Guide
EMUSA Wastegate Instructions
Rolldogk20's Cal - RBC IM, RC750 Injectors, 4Bar Hondata MAP, Hondata Boost Solenoid, 2.5 Straight Pipe, Stock Fuel Pump 8.5 PSI - Use at your own risk!
Things you HAVE to buy:
Injectors (something along 550cc or above)
Dump Tube (make your own or ebay one, either ebay tube will work, they cost like $30)
Kpro
3" - 2.5" or 2.25" silicone reducer
Hondata 4bar MAP Sensor (if your going over 10 psi)
Things you might want to buy
MAC Boost Solenoid
Hondata 4 Bar MAP Sensor
#7940 NAPA Rad Hose
2.25"ID x 3"ID 4Ply Silicone Coupler
Deatschwerks Injectors - or whatever you wanna run.
Deatschwerks 65c Fuel Pump - or a walbro 255, the 65c requires no cutting or strapping. direct replacement for OEM.
38mm Dumptube on ebay, there are 2 types and either will fit, i would sugggest the one thats bent in the middle.M14 Banjo Bolt or TSI Timing Cover Inspection Plate Return (you can email them @ sales@turbospecialties-race.com) for $25.
ATP Oil Restrictor
TP8 from these guys. - Don't be scared to order from them, I live in CA and it look only 3-4 days to get. Thats faster than most of my ebay purchases.
Make your own oil feed/return lines, its cheap and easy.
Vacuum Block
Gauges
K-Pro
Spark Plugs:
Stock spark plugs from NGK - IZFR6K11
Stock spark plugs from Denso - IK20L
Colder plug I found on google that everyone else is using (to my knowledge) is the NGKs below, or Denso IK22's.
IRIWAY7 cross reference BKR7EIX
IRIWAY8 cross reference BKR8EIX
Turbo rebuilt to Garrett Specs - http://www.blaastperformance.com/index.php > Remanufacturing service > Knock-off T3/T4, upgrade to Garrett (XSP,ZY) - $260 w/6 month warranty
Quick Link to install instructions - HERE
Quick Link to Greddy piping mod - HERE
Found out that I actually got a 6 psi spring in my wastegate, read other websites and they list the springs as 4(little spring under cup),6 (Stock), 8(+2 spring) and 10(+4 Spring). but some people have received 4(little spring under cup), 8 (stock), +1 and +2.
Made 247hp, 221tq @ 6 psi
Made 297hp, xxxtq @ 8 psi
http://www.youtube.com/watch?v=63jGMyloI1M
Also, someone said on another forum, the coilovers are comparable to Racelands.
And they are made by the same company that makes Megan stuff.
Last edited by AKEP; 05-28-2013 at 05:24 AM.
Good find i been trying to get info about this brand !!!
I just emailed them to see how much the 3inch downpipe was for our car I want one!!!!
you can buy everything they make from http://www.speedyracer.com - same page from the ebay sites
I think I'm gonna get the downpipe!!!!
the dp is the same as the one in the kit so its not a full 3" its a 2.5 to 3" ..
just wounder but what kind of numbers are you guys getting running there kit to a rev hard kit? other then it has no injectors or ecu upgrade. but running this kit with kpro?
i'd imagine you can't run it without injectors. our puny ones cant hang with anything. I've seen mine hit 80%ish duty with bolt ons @ 12.x:1 A/F. so boost at 12.x:1 will def be way too much.
gtimport made 268(?) with it at 9psi on our stock motor.
I have had good luck with the EMUSA kit, I ran/raced it all summer with no problems and will be putting the same kit on my k24a2. After about 5000 km on the kit over the summer the turbo is still tight and didn't leak any oil.
i didnt mean not run t without changing the inj. just how id dont come with themand clips. i ordered a revhard kit but they havnt sent it out so i told them to forget it since i wanted to upgrade wastegate bov and turbo but there slow as hell. but whould the gt30 turbo bolt up to the dp and mani in this kit??
im going to pick up a k24 swap next week so i was just woundering if everyone is getting aroun the sazme numbers as the rev hard kit for 4g's why not get this kit and a turbo upgrade and have more money for my swap. im getting either a a1 or a2. not sure what one boosted would gt bigger numbers!
The GT30 probably won't bolt right up to this downpipe because its not a standard garrett 5 bolt flange. The flange is made to fit this emusa turbo and wouldn't bolt up to my Turbonetics super 60 all but 1 of the 5 bolt holes was off way off, but it wouldn't be to hard to have a Garrett 5 bolt flange welded on.
ave you guys upgraded the turbo at all in your kits? i dont think running more then 10-12psi with that cheap turbo would handle it?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks