a1 head? Nice numbers
What's e-cutout?
Sup Fellas,
Well I added a couple of parts to the n/a set up which was a full 3in cai and a 3in e-cutout. I am very happy with the results mainly because my tuner cleaned up the driveability alot. The numbers before the retune were 214whp and 168wtq, I thought I made more torque than that but I guess I read it wrong the last time I seen it . With the new parts it put down 220whp and 176wtq. The biggest gains were in the midrange where it picked up 13hp and like 7tq, I will try and get the dyno sheet so you guys can see the difference. Just thought I would share the new numbers thanks
mods
k24a1
a2 cams/springs/retainers/seats
Type s aem cai
type s megan race header
qtp oval e-cutout
kpro
550 rc injectors
hondata img
Im happy with it and dont see it making much more than that since its still on the stock tb and prb mani, so now its time to save up for my stg4 clutch and boost
nice, i plan on doing this within a few months. my rh should be here by friday then i got to look for some cams. expect to see a few pms from me asking about your tune in the future
awesome vids man! i like a lot. 6speed though right? sounds like you run through the gears a lot
edit: just watched the end with the dead stop runs, your launchs sound like mine, anything over 20% throttle is usless haha sounds amazing dude, my next setup is this one, your using the exhaust rocker setup on the intake side right?
did you tune with the cutout open or closed? I'm debating getting one with a JRSC setup, but wondering if when you open/close it it fucks up your tune. Any information I can get would be helpful. Also, would I put it onto my raceheader or onto my midpipe? Thanks a bunch.
Yeah its 6speed, its alot of fun and im using the exhaust rockers on the intake side aswell.
I got it tuned with the cutout open, when its closed it doesnt do anything but make it rich and slow the car down a little bit. You can tell the difference when its open the car just pulls alot better.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks