Cold Air Intakes
AEM Cold Air Intake (02-05 Si specific)
Cost - $50 to $352 (used to new prices)
Diameter of piping - 2.5 inches
Filter type - Cotton, K&N style
Where to find - Ask our Vendors
Misc. - The original cold air intake design for our 02-05 Civic Si.
AEM Cold Air Intake (02-06 RSX Type S specific)
Cost - $70 to $395 (used to new prices)
Diameter of piping - 3.0 inches
Filter type - Cotton, K&N style
Where to find - Ask our Vendors
Misc. - Replacement washer bottle not needed for Ep3 application. Some modification may be required for Ep3 fitment.
Cheap Ebay or Chinese Cold Air Intake
Cost - $25 to $60 (used to new prices)
Diameter of piping - 2.5 inches
Filter type - Foam, very thin and low filtration
Where to find - http://www.dashzracing.com/02-05-Hon...-p6770767.html
Misc. - This is just an example of the cheap Chinese or Ebay cold air intakes for the 02-05 Si. I'd highly recommend changing to a K&N filter and looking for one in a 3.0" diameter vs. the 2.5" diameter if you're going to "go budget" on your intake.
Fujita Cold Air Intake (02-05 Si specific)
Cost - $80 to $256 (used to new prices)
Diameter of piping - 2.5" or 3.0" (for Si specific or RSX Type S specific either will work)
Filter type - Cotton, K&N style
Where to find - Ask our Vendors
Misc. - Not to be confused with the Fujita short ram intake.
Fujita Cold Air Intake (02-06 RSX Type S specific)
Cost - $80 to $256 (used to new prices)
Diameter of piping - 3.0 inches
Filter type - Cotton, K&N style
Where to find - Ask our Vendors
Misc. - Washer bottle that is included is not needed to install this into your Ep3. Other modifications to make this CAI fit, may be required.
Discontinued Injen SP Cold Air Intake (02-05 Si specific)
Cost - $100 to $236 (used to new prices)
Diameter of piping - 2.5 inches
Filter type - Cotton, K&N style
Where to find - Ask our Vendors
Misc. - Specific to fit around the battery on our car, instead of under our battery tray. Fuse box must be relocated as well. Has since been redesigned by Injen so this version is discontinued.
Injen SP1576 Cold Air Intake (02-05 Si specific)
Cost - $100 to $236 (used to new prices)
Diameter of piping - 3.0 inches
Filter type - Amsoil filter (no oil needed & air flow is improved based on test i found)
Where to find - Ask our Vendors
Misc. - Current production Injen CAI for 02-05 Si. Not to be confused with the old version above. Arguably the best 02-05 Si specific cold air intake available to our cars.
Injen SP Cold Air Intake (02-06 RSX Type S specific)
Cost - $80 to $276 (used to new prices)
Diameter of piping - 3.0 inches
Filter type - Amsoil filter (no oil needed & air flow is improved based on test i found)
Where to find - Ask our Vendors
Misc. - Very similar design to the RSX Type S specific AEM cold air intake. Washer bottle NOT needed for EP3 application. Some modification may apply.
Tenzo R Cold Air Intake
**This picture DOES NOT look accurate to an Ep3 CAI setup**
Cost - $60 to $108 (used to new prices)
Diameter of piping - Unsure. Either 2.5" or 3.0". Requires a 3.0" bypass, so possibly 3.0" inches
Filter type - Unknown (most likely cotton)
Where to find - Ask our Vendors or http://www.nlmotoring.com/Tenzo-Cold.../tcaci02si.htm
Misc. - The picture above DOES NOT look accurate for an Ep3 CAI. I can not find an actual accurate picture of this CAI.
Bookmarks