DIY: 5 Lug Swap Conversion - 02/03 ep with 02/03 DC5 Type S Parts

[CastorTroy2]

LCAs. Yes with the 02-04 model, you can re-use your EP3 LCAs. This may not be true with other years (05-06).

Axles. No you cannot re-use your EP3 axles. You must buy axles that fit the RSX Type-S. The spindle is much larger on the Type-S. If you tried to used the EP3 axle, it would not mate to the hub/rotor assembly correctly and would probably spin freely.

Awesome man. Thanks a lot. Seems pretty simple to install., just need to get all the right tools before i start

[lordofthesiths]

anyone know where to get the ball joints?
I've checked BKhondaparts.com and hondapartsunlimited.com and the both show the ball joint as part of the knuckle.
i've seen aftermarket ones for lowered cars but mines not lowered.

[ragebomb]

anyone know where to get the ball joints?
I've checked BKhondaparts.com and hondapartsunlimited.com and the both show the ball joint as part of the knuckle.
i've seen aftermarket ones for lowered cars but mines not lowered.

I didn't search super hard for them, but I remember I came across aftermarket ones made by Buddy Club:
http://www.corsportusa.com/store/cat...oducts_id=6016

Those might be the ones you were talking about.