Last edited by cow; 12-17-2008 at 06:55 AM. Reason: sweet jesus, you quoted the entire first post
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
I've heard we can use the AEM intake for the newer si. Since the EP's AEM intake is 2.5" piping and the newer si's AEM intakes are 3"
You can, but prepare to use the duct tape to tape over (or create a block off plate/weld it) the hole where the MAF sensor is located.....
http://forums.clubrsx.com/showthread...ight=si+intake
P.S. I'm not endorsing the use of the duct tape, but I see no issue with creating a block off plate or tig welding it closed.
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
I wouldn't go the ebay route. If the RSX Type-S intake is 3" and doesn't require modification like you stated, this would be the way I'd go. Now the question is, is this true for the AEM intake only, or does it apply to other brand intakes as well? Also is it worth it on a K20a3?
dont forget ssr's new intake box http://www.speedstar-racing.com/stor...89b633e52eff9e
and injen doesnt use k&n filters any more, they use a superior amsoil filter (no oil needed & air flow is improved based on test i found)
Become a Sponsored Member. Only $20 for an entire year!!
Need a service manual for your K-series?
Ep3 Service Manual DC5 Service Manual CL7 Service Manual
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks