Just post up if you hit any snags.
It's pretty self-explanatory, but there are some spots that can be a little confusing, especially if you're swapping out the shift box itself.
Good luck!
Sweet! I'll be swapping out the bushings this weekend and there are some great tips in here. Thanks.
Just post up if you hit any snags.
It's pretty self-explanatory, but there are some spots that can be a little confusing, especially if you're swapping out the shift box itself.
Good luck!
im pretty sure no one should have a problem doing this install.
The only problem I had doing this was taking out the bottom right rubber bushing. But I got it out, eventually, and putting the new bushings in was so easy!
just did this mod two days ago, slightly different feel to the shifter
corsport, be careful not to drop any bushing, theyre aluminum and you cant get them with a magnet
can this guide be updated with pics? id really like to do this job
I think if you look at the Buddy Club Short Shifter install thread that has pics, it should have enough info for you do this part. It's very easy - I did the bushings when I did my BCSS install a couple of months ago. I can summarize it in one sentence - screw off your knob, pull out the lower dash, unscrew gold bolts, remove rubber bushings, put back shifter, slide in bushings one bolt at a time (concave sides facing each other), tighten all bolts, push lower dash back on, screw knob back on. What are you having problems with? LMK.
There are currently 2 users browsing this thread. (0 members and 2 guests)
Bookmarks