Whatsup EPHATCH. Ive never used nitrous before, but i am thinking about adding it to help spool my turbo. right now Im makeing 626whp on 18psi. I dont want to add more than a 50-75 shot. I will also be upping boost. My goal is 800whp+. I know the motor can handle it. Just wondering if anyone has done something like this on here. Im thinking of going with the NOS Sniper kit for EFI. any thoughts of this kit? Thanks,
its a K24A1 botto end and a K20A2 head. the motor is completely built and only used at the track.
But back on topic. I've seen guys use nitrous kits to spool their turbo and cut out the lag. If I was going to do it I would go with the Zex kit. You program it to what boost you want and it sprays to that boost and cuts itself off. You talking about spraying through the intake filter?
Last edited by skep18; 02-26-2009 at 12:24 PM.
you'll probably blow the welds on the intake with NOS.
hahah all kidding aside i hope to see you break 800. that would be sickkkkk!
Using kpro to handle nitrous duties would far surpass using that zex box...
I would start small, something like a 35 wet shot in a window from say 3000-5500 hundred rpm. What turbo are you currently running and when does it spool now? You'd be surprised what something like that will do for you.
AkA EX FULL-RACE EP3
I thought the zex box worked independently from the ECU? If you can use the same senerio with the Kpro as the zex box then that would be awesome. I was looking into doing this when I upgraded to boost but on a smaller scale haha. You wouldn't need much of a shot if all your doing is spooling the turbo wouldn't you?
I'm running a precision 6265. And the NOS sniper kit I think was good for 50-75. I hit full boost at 6400rpm.
Any input on if the NOS sniper kit is a good choice?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks