http://www.ephatch.com/forum/showthr...g-lights/page4
theres a couple of links in the more recent posts in this thread. search bar works too!
Whats up guys, getting my OEM foglights in, in a week or two, i was just wondering how you install them, do you take the bumper off and cut the pieces out? if anyone has a link to a step by step thatll be great, thanks !
http://www.ephatch.com/forum/showthr...g-lights/page4
theres a couple of links in the more recent posts in this thread. search bar works too!
read directions before cutting. or you'll be gluing your bumper back together lol
measure twice, measure again, measure some more, then measure, measure again, measure more, then after you've checked it a few more times, then start cutting...a roto-zip bit works best, and also cut it inside of where you want to cut, test fit, then cut a little more, repeat.
on the type r bumpers, there is actually a line on the backside of the molded bumper that shows you where to cut and drill...dont know if thats the case on the USDM bumpers
my ep is white...
- We can talk numbers all you want, but the bullshit stops when the flag drops...
moved to lighting and exterior where it should be.
OP please take a look and be aware of where you post..it will not only get you a faster more accurate answer..but it will keep it clean and organized so someone else with the same question can find it. easier.
be jealous :P
PS..im a fellow masshole too..Welcome to Ephatch :D
be jealous :P
heres what i used for my install
http://www.handa-accessories.com/civic/sifogs.pdf
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks