Share your Kpro, Emanage, AEM EMS, etc. tune and setup here....

[ilovemyep3]

Im posting up a basic k20a3 I/RH/E HiOc basemap i put together with some WOT street tuning and some partial throttle tuning including ignition advance on the 10, 20, 30 degree maps.

Its the most commonly asked for basemap and it should do you well for quite a while.

*lo cam not tuned, all hi cam... 2krpm and up. Rev limit 7300rpm. No fuel economy (highway) tuning. Check immobilizer if needed.*

k20a3IHE.kal

How well would this work with stage1 cams and I/RH/E ?

[04sidriver]

How well would this work with stage1 cams and I/RH/E ?

I have a map for s2 stage 1 cams and i/h/e

[Ba82Ep3]

How well would this work with stage1 cams and I/RH/E ?

Which cams? (S2 cams? I started with those years ago). It would work well as there is enough fuel there... but a little street tuning would make it better.

[04sidriver]

Here is my tune. My ep has s2 stage 1 cams, h/i/e

eTune#8.kal

[ilovemyep3]

Thanx will try it tomorrow if I get a chance will let you know how it.works out