the flange on their turbo is a 5-bolt flange, but only specific to their own turbos. To run anything else, you will need a regular 5-bolt flange and get it welded on.
Im finding it hard to believe that no one makes a downpipe for the emusa/revhard manifold except emusa lol so that being said all you guys running the emusa kit can i get some fitment pics of your downpipe? im going to bite the bullet and go with this, im 99% sure this is the one that comes with the turbo kit, correct me if im wrong, the fitment in the pics looks pretty good:
http://www.speedyracer.com/exhaust-p...Turbo-Downpipe
and a 3" kteller kit with this muffler:
http://www.meganracing.com/product_d...=1192&catid=21
i may try to ovalize the mid pipe so i can retain some ground clearance, but back on topic if anyone has installed pics of that downpipe hook me up and tell me how you like it
the flange on their turbo is a 5-bolt flange, but only specific to their own turbos. To run anything else, you will need a regular 5-bolt flange and get it welded on.
Well I can deal with that honestly that isn't a big deal
it doesnt bolt to cat if anyone wanted to try. its 2.5". the pipe it connects to immediately flares to a 3". matches up to kteller piping once you slice off all that extra piping on the outlet end.
it works. it fits. you just need a 3" 3 bolt flane to match it to a premade exhaust or fab it to kteller one way or another.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks