awesome find!
I need to get my hands on a set.
How-To Install (EDM) EP3 UK Type R mirrors
https://docs.google.com/open?id=0B7X...zV2bGV5V3JKZm8
Last edited by eurocivic; 11-14-2012 at 06:39 AM. Reason: Updated the post
awesome find!
I need to get my hands on a set.
thanks for this!!! im going to put mines up for sale except mines are plug n play already but very easy to do this imo.
Will - you need to work on your post count my man!! LOL
those mirrors look great man!!
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
Great write up. Good find
UK mirrors are sick! Good stuff
Dam, this post would have been helpful 5 years ago. I had to do mine with a TSX wiring diagram and rsx wiring diagram to figure out what was what and also to figure out for the defrosting button.
I'm about to tackle this project and from the looks of the instructions the signal function was wired but there was nothing about the heated function, does anybody have any insight on this?
I will soon have these exact mirrors with the heated UK switch
The two Blk wires are for the heated function. One would go to ground the other to the switch. Do you have the EDM heated mirrors switch? My switch came with pigtails so I knew what wires to hook up. I have a garage and I live in TN it never gets that cold. So that's why i never connected the wires for the heated function. Let me know if you need more help.
Wow very helpful diagram. Although I did mine a bit different, without cutting my harness at the combination switch for turn signal function. My install was extremely easy. I also did not connect the heated mirror option as I live in California lol. But did notice something interesting on the USDM harness that had the possibility of running the heated mirrors without the switch.
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
just to let anyone know, that diagram doesnt work at all. the controls listed on how to connect them are backwards and your better off powering them to the fender markers to make them blink. im still trying to get the controls right and once done ill post then correct way to get these wired up
i need the image of the connection of the keypad of the dash, to finish making the conversion of usdm to uk ,I could help with that, thank you very much
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks