bump!
I'm trying to make a DIY for JDM EP3R power folding mirrors
Anyone have a copy of the JDM EP3R Service Manual?
I'm looking for something similar to a helms manual.
I need the electrical/circuit diagram for the power folding mirrors.
Let me know if you have any leads on getting a copy of it. Thanks guys!
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
bump!
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
Did you see this thread?
http://www.ephatch.com/forum/showthr...Type-R-mirrors
Yea, I did. That link is a DIY for adding UKDM facelift 'blinker' mirrors onto a USDM ep3. It taps directly into the stalk and doesnt utilize the heated mirror function.
I'm trying to wire up the power folding option found on the jdm ep3r. I haven't been able to source a jdm ep3r specific power folding mirror switch, but I did find one that might be compatible. I need the wiring diagram to figure out which wire is which.
I have found plenty of threads where owners for the switch to work via a relay chain, but I want to be able to use an oem ep3r switch. I think I figured out the part number but I haven't been able to confirm it.
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
Is this what you're looking for? ;)
The part number for the JDM EP3R folding mirror switch is:
- 35190-S7A-J11ZB
Last edited by DA9_GSR; 08-01-2012 at 09:12 AM.
I too am slowly putting together JDM EP3R folding mirrors. I acutally plan on removing the entire harness and rewire it like OEM. All the wiring for the mirror movement is identical from USDM to JDM. Being a canadian SiR, I have power heater mirrors. So I will be able to used some wires that are already there. I only have to add two more. You americans have it a little less easy. You'll have to add quite a bit more to make it work.
Last edited by skep18; 05-14-2009 at 03:38 PM.
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
I'll let you know when I track one down.
I have a switch but it's for an EK9. The switch has a built-in relay, which is similar to the 35190-S7A-J11ZB but would require a rewire. If I can track down a switch, I'll let you know
any chance you have the wiring schematics for the EK9 mirrors? lol
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks