have you looked at the aftermarket tensioners?
anyone has an auto tensioner for sale?
also, if you're using the rsx 2.5, what spacer do you use and what's the dimension? i hope i can find one at local hardware store.
have you looked at the aftermarket tensioners?
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
which aftermarket tensioner? do you have the link?
Skunk 2 sells one...
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
EPHATCH.COM 4 LYFE!! OFF THA CHAIN KREW #1
udontknowjack's mom was here....twice!
UPDATED SITE INFO!
Want to become a Site Sponsor? Click Here!
PM for HELP!!
yes, it's for supercharger belt. if you look at the exploded diagram from the website, there's a spacer that will sit between the tensioner.
do you know anyone has a modded auto-tensioner for sale?
the auto-tensioner has like a washer or something, the manual one i have no clue. gamma pulled one out but it didn't sit inline with the other pulleys. if u have access to a sawzall or angle grinder you can just make one yourself.
what part did you not understand? actually, i wouldn't know how to better explain it because i dont know how to install the manual tensioner (at least the one gamma has anyways) and without pics, and you not knowing how a tensioner works, i don't know how to explain it to you. a modified tensioner is exactly that, the stock tensioner sliced up to fit the supercharger snout.
I have been kinda wondering about this. I really want to get a JRSC for my EP and have been doing a lot of research on it but I'm still a little confused on a few things, one being the tensioner. If I buy the kit brand new does it coem with an auto tensioner or just with a manual one and if it just come with the manual tensioner where would I buy an auto one?
the kit comes with a manual tensioner. Jackson racing does not make an auto tensioner assembly for our car. you need to modify your stock autotensioner by cutting the forward lower tab (where the idler pulley bracket bolts to the tensioner) off in order to give clearance for the SC snout.
ok haha, I'm still a little confused about some of the aspects of the supercharger setup, I've usually always done turbo but I really want to do the supercharger on my DD. So how exactly would you do that to make it into an auto-tensioner? Do you have any pictures? Thanks man
there are a couple DIY threads out there between EPhatch and Clubep3- just have to search around
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks