UPDATED 2/25 (Went to the track)
http://www.youtube.com/watch?v=8Z6-AwHCIrA
---------------------------------------------------------------------------------------------------------------------------------
UPDATED 2/28
No up close and personal shots of my car yet but i got some track shots, none the less pictures as requested.
Streets of Willow Event (k20a2 setup with bout 250whp)
All Day Every Day
Chasing an R35. Ended up getting a faster lap time than him by a few hundrends of a second
Far away shot
And some Booty
and me
Fastest Lap of the Day
http://www.youtube.com/watch?v=se9KKg-XP2Y
-------------------------------------------------------------------------------------------------------
THE BEGINNING
Project took about 6 months to complete. Countless hours of research, saving up, and waiting for parts. With the guidance of my boss, i was able to build it from bottom to top by myself.
dont mind the mopar box
plaster gauging to check clearances and figuring out what bearings to use
Checking Clearance
Filing down the Rings
Gapping Rings
Ready to be pushed down
JE 13.3s
Claying the motor to check piston to valve clearance
K20a2 Oil pump and baffled installed (k24a1 no modifying needed)
Karcepts PS and AC Delete
Js Racing Pan
Heres the K20a2 Head i ported myself
Motor together and ready to go
Heres what a day at the shop looked like
Motor is in
BCRH w/ Invidia Q300 Catback
Tuned by Todd @Churchs
Dyno Results (Not shown but 322 hp and 241 torque was the highest it made)
-----------------------------------------------------------------------------------------------------------------
Dyno Vids
http://youtu.be/DxHovLztP5k
http://www.youtube.com/watch?v=bP9GFKo5zq0
------------------------------------------------------------------------------------------------------------------
6 Months well worth it. The motor runs perfect, still in the process of breaking in the clutch. I will have some in car footage soon.
First Carwash in 6 months
Heres my mod list
Engine
K24a1 Block 88MM
JE 13.3:1 Pistons
Blue Print Pro I-Beam Rods
OEM Rod and Main Bearings
k20a2 Oil Pump
J's Racing Baffled Oil Pan
Circuit Racing Timing Chain Guide
Hybrid Racing Timing Chain Tensioner
k20z1 Timing Chain Cover
K20z1 Crank Pulley
Karcepts a/c and p/s Delete
k20a2 Port and Polished Head
Kelford stage 2.2 Cams
Blue Print VTC 40* Limiter
Supertech Dual Vavle Spring
Supertech Valves .5MM Oversized
Supertech Titanium Retainers
Port Matched RBC Intake Manifold
RC 750CC Injectors
Walbro 255 lph Fuel Pump
Skunk2 70MM Throttle Body
Custom Short Ram Intake with Apex'i Filter
Buddy Club Race Header
K20a2 6 Speed Transmission
Wavetrac Limited Slip Differiental
Synchrotech Carbon Synchros
5.07 Final Drive
Tsx 6th Gear
Clutch Masters Stage 4 6 Puck Cluch
Competition 11lb Flywheel
Bookmarks