1.first remove side marker your going to push it towards the rear end of the ep3 then kinda pull it out at the same time its not hard.
2.once you got the side marker off then you will see a green and a black wire the green wire, is the one you want to extend to be able to run it to the head light, the black how ever you will not use just clip it and delete it.
3.ok now that you have ran what ever wire you decided to use threw your fender well now heres where what you want to do run it to your little bulb in the head light just unplug the bulb, there you will see a red and black wire, clip and strip the red wire and now wire the extension you made for the marker to it. make sure you got it nicely wired and tight you don't want it to come lose and blow a fuse!
4.now that you have done all 3 steps make sure you deleted the black wire from your side marker good and make sure where you wired your extension of the green wire on the side marker to the head light is nice and tightly wired turn you ep3 on and check the signals and also push your emergency lights and make sure they work!
your done enjoy!
Reply With Quote
Bookmarks