i Have always wondered about block guards, do people run them? any problems, do they actualy help?
Main Bearings(what kind and can i use oversized?)
What seals do i need?
Pistons/rings
Head studs (are k20 and k24 different?)
Timing chain ( http://www.hondapartsdeals.com/hpa_p...nGroupID=11769)
71.34 (chain)
Bottom end seals ( http://www.hondapartsdeals.com/hpa_p...nGroupID=11778 )
Crank Bearings (http://www.hondapartsdeals.com/hpa_p...nGroupID=11784)
Info:
http://forums.evans-tuning.com//viewtopic.php?t=326
http://www.team-integra.net/sections...?ArticleID=405
Cor-sport/ 132 for arp head studs?
Last edited by Fico; 08-25-2008 at 08:12 AM.
i Have always wondered about block guards, do people run them? any problems, do they actualy help?
9/1
Well the order is in
Cp 10:1 pistons with rings 87mm bore
head gasket 87mm bore
arp head studs k24
all bought a few min ago
K24's and K20's use the same length studs, so you will be ok there.
ALL advice issued with this "Disclaimer"
Tim "the Toolman" Taylor is my HERO ! ! !
"Labor Unions are Domestic Terrorist orgainizations"
9/03
I got my block in to work today stock it in a duffel bag and walked to the bus with it, now my arms are brused from the weight of the straps, we took a pole at work guessing how much the block weighed( just the cyl's not the bottom girdle) and Deb our receptionist got it, she guessed 47 and it was 46.808lb's so not a bad guess. I let it soak in the parts washer all day and i cleaned it up after work, i also sandblasted the bottom girdle and it looks sexy.
9/4
Forgot to grab the paint i was going to spray my block with, a nice flat black with a red valve cover should look nice id say? i started working on shaveing my valvecover to paint last night and ill work on it more tonight.
9/5
i got my h beam rods in today i need to bring the crank in and then check the bearing clearances
My pistons/ head gasket/ head studs/ are in but there at fed ex, because the last 2 days the Fed ex guy hasnt left me a door tag or even knocked, i was actualy home when they tried to deliver(which is never the case) but i should be able to pick them up before work today so if im lucky ill try to snag some pictures to throw up
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks