if you can meet me off of N Cooper St and I-30, the packets are yours.
^this.
the headlight is made of 3 layers. (1) the clear cover, (2) the middle layer that the blubs/projectors attach to, and (3) the back cover w/ gaskets. you can slip the packets into the headlight between the #2 & #3 layer. hope that makes sense
Green Crew #7
Please donate and support EPHatch.com: Greenie Status, License Plate Frames, Banner & Small 'ephatch.com' Decals
Was your WTS/WTT/WTB closed? Please read the following: link 1 & link 2
Ok, I see what you guys are saying. I wasn't thinking of those gaskets back there. Thanks!
I love the 56k references people put in their thread titles. Is there even 56k anymore?
awesome
Let me know when the clear ones are obtained
does anyone know if theres anything different in the 02-03 bumpers? I removed all the same clips and screws but its still not coming off. It seems to be pretty tight where you remove that screw from the wheel well.
Any ideas?
thats what I thought. Everything was the same, I even checked the service manual, I have everything out - i'm pulling on the bumper with my legs pushing on the tire and it wont come off; right at that circular part by the headlight, there is something keeping the bumper on. Everything else is loose and is ready to come off, just that little area on each side, feels like its bolted on tight. And yes, I took the screws out up top there.
This is driving me nuts.
There's only one screw holding that area which is in between the wheel and fender. Just pull it out and then toward to the front.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks